Some antennas are equipped with 3/8’’ female threads. This thread is also called the large camera thread. Such antennas can be directly mounted on tripods with 3/8 inch male thread, e.g. AM 9144. Adapters are usually not required.
Some mast systems use the widely used
22 mm antenna tube with indexing ring (see Fig. 2) to fix the antenna. If the antenna is not equipped with a 22 mm tube the AA 9213 is required (see Fig. 1).
AA 9213 is perfectly suited for small antennas. Larger antennas might cause torque around the 22 mm tube. Such large antennas should only be mounted if the center of gravity is below the 22 mm tube.
The indexing ring can be shifted along the tube after loosening 4 grub screws. It can also be removed completely. The star handle screw 3/8’’ is undetachably fixed to the Adapter.
|
Antennentyp Antenna type |
Applicability |
|
BBHA 9170 |
AA 9213 is perfectly suited. There is no height offset when rotated around the tube. |
|
HFRA 5148 |
AA 9213 works well because possible |
|
HFRA 5152 |
torque is negligible. As the H-field |
|
HFRA 5153 |
pattern of these antennas is rotation- |
|
HFRA 5154 |
symmetric turning the antenna around |
|
HFRA 5155 |
the tube is usually not required. |
|
HFRA 5156 |
|
|
HFRA 5157 |
|
|
HFRA 5158 |
|
|
HFRA 5159 |
|
|
HFRA 5170 |
|
|
HFRAE 5160 |
|
|
HFRAE 5161 |
|
|
HFRAE 5162 |
|
|
HFRAE 5163 |
|
|
FESP 5133-7/41 |
|
|
FESP 5134-40 |
AA 9213 works well but an additional thread reducing adapter TA 9204 is required. |
|
HFRA 5149 |
AA 9213 can be used. However these |
|
HFRA 5150 |
antennas are heavier and can cause |
|
HFRA 5151 |
torque around the 22 mm tube. They |
|
FMZB 1513 |
should only be mounted with the center |
|
of gravity under the 22 mm tube. |
|
Antennentyp Antenna type |
Applicability |
|
BBHA 9170 |
AA 9213 is perfectly suited. There is no height offset when rotated around the tube. |
|
HFRA 5148 |
AA 9213 works well because possible |
|
HFRA 5152 |
torque is negligible. As the H-field |
|
HFRA 5153 |
pattern of these antennas is rotation- |
|
HFRA 5154 |
symmetric turning the antenna around |
|
HFRA 5155 |
the tube is usually not required. |
|
HFRA 5156 |
|
|
HFRA 5157 |
|
|
HFRA 5158 |
|
|
HFRA 5159 |
|
|
HFRA 5170 |
|
|
HFRAE 5160 |
|
|
HFRAE 5161 |
|
|
HFRAE 5162 |
|
|
HFRAE 5163 |
|
|
FESP 5133-7/41 |
|
|
FESP 5134-40 |
AA 9213 works well but an additional thread reducing adapter TA 9204 is required. |
|
HFRA 5149 |
AA 9213 can be used. However these |
|
HFRA 5150 |
antennas are heavier and can cause |
|
HFRA 5151 |
torque around the 22 mm tube. They |
|
FMZB 1513 |
should only be mounted with the center |
|
of gravity under the 22 mm tube. |
|
| Specifications: | |
|
300x100x38 mm |
Dimensions without lever |
|
184 mm |
Free tube length: |
|
22 mm |
Tube diameter: |
|
35 mm |
Diameter of the indexing ring: |
|
62 mm |
Aluminium bar length: |
|
36 mm |
Aluminium bar height: |
|
468 g |
Weight: |
|
3/8» |
Thread: |
|
14 mm |
Free thread length: |
